|
LDG
RT-11 ist ein Automatik Antennenanpassgerät, welcher über zwei
verschiedene Möglichkeiten angesprochen werden kann. Beide
Möglichkeiten sind optinales Zubehör!
 |
Steuerung über
LDG Interface-Kabel für viele gängige Amateurfunkgeräte |
|
Remote Einheit RT-11
Remote |
RT-11 ist so
konstruiert, dass selbst Montagen an Masten, etc. möglich sind.
Dieser Tuner ist auch für QRP-Transceiver geeignet, da er
bereits ab ca. 0,1 Watt Sendeleistung arbeitet.
Technische
Daten:
|
Frequenzbereich: |
|
1.8
- 54 MHz |
|
max.
Sendeleistungen: |
|
0.1
bis 125 Watt PEP (6m Band max. 50 Watt) |
|
Anschlüsse: |
|
PL
(UHF-Norm) |
|
Antennenimpedanz: |
|
6-800
Ohm |
|
Stromversorgung: |
|
11-14
Volt DC |
|
Steuerung: |
|
entweder
über LDG Interface Kabel oder über Remote-Einheit (beides
optional) |
|
Gehäuse: |
|
ABS
Kunstoff-Gehäuse, auch für Aussenmontage |
|
Abmessungen: |
|
ca.
21,59 x 13,97 x 7,62 cm |
|
Gewicht: |
|
ca.
933g |
The RT-11 can be used anywhere.
The water resistant case can be mounted on a tower, in a boat
or car, outside the window of your shack, in your attic... almost
anywhere. The case has 2 flange mounting brackets to facilitate ease
of mounting. Since the unit is RF sensing, it will tune when it senses
a band change (high SWR), thus it will operate with any HF radio. The
RT-11 interfaces directly to ICOM, Alinco, and
Kenwood tune buttons via an optional cable. Yaesu owners can
use our remote control. Other radios can use the remote control. In
normal HF operation, the RT-11 will load a coax fed antenna
system with an SWR or 10:1 or less. If you use long wire,
random length, Zepp, or other unbalanced antenna systems, we have an
external 4:1 Balun that works nicely with the RT-11.
If you are considering an autotuner for use inside your shack, you
might consider purchasing an AT-11MP. Another option would be
to use the RT-11 with our optional Remote Control. The remote
control has Power On and SWR Status LEDs, Auto / Semi Auto push button,
manual tune and bypass buttons. The remote control will mount under
your shelf, dashboard, by the helm, etc. It gives you an added measure
of control over the RT11. If shack space is a premium, the
remote could mount nicely under a shelf while the RT11 enjoys a
spot on the carpet behind your desk.
The tuner can handle 0.1 to 125
watts (100 watts continuous, 50 watts on 6 meters) of RF power.
Specifications:
|
Designed
for Remote Mounting and Operation |
|
Water
Resistant ABS Plastic Case |
|
Microprocessor
controlled |
|
1.8
to 54 MHz coverage |
|
Tunes
6 to 800 ohm loads, 10:1 SWR (3:1 SWR on 6 Meters) |
|
Optional
Remote Control Head |
|
Optional
ICOM, Alinco, Kenwood, or Yaesu interface cable |
|
Configuration:
Switched "L" Network |
|
Inductor
range: 20 uH |
|
Capacitor
range: 3900 pf |
|
Tuning
time: 0.1 to 5 seconds, 3.0 Average |
|
Current
Consumption: 7 to 250 ma, 20 ma Average |
|
Voltage
Requirements: 11 to 14 volts (user supplies power source) |
|
Power
range: 0.1 to 125 watts, 100 watts continuous (50 watts on 6
meters) |
|
For
Dipoles, Verticals, Vees, Beams or and Coax Fed Antenna |
|
Optional
External Balun for Random Length Antennas |
|
Kit
Builds in 6 to 8 hours (average) |
|
Enclosure
size: 8.5 x 5.5 x 3 (measured in inches) Weighs 2.5 Pounds |
|
Flange
Mounting Bracket |
|
6
Meter Specs: 3:1 SWR or Less, 50 Watts output or less |
Interface:
|
K-OTT
(Kenwood) |
|
Y-OTT
(YAESU) |
|
AL-IC-1
(ALINCO) |
|
IC-2
(ICOM) |
RT-11 Remote (optionales Zubehör)
Weitere
Produktinformationen:
(alle
PDF Herstellerinformationen dienen nur zur weiteren technischen Erklärung)
|
