|
The FT-60E is a new
dual-band FM transceiver with extensive receive frequency
coverage, providing versatile two-way amateur communications along
with unmatched monitoring. A new-generation Emergency Automatic ID (EAI)
feature, for Search-and-Rescue operations, is introduced in the
FT-60E!
 |
FT-60E is the
european version. TX expand also possible |
|
WIDE
BAND RECEPTION 108-520 MHz &
700-999.990 MHz (Cellular
Blocked) |
|
|
NEW
EMERGENCY AUTOMATIC ID SYSTEM |
|
|
HUGE
LCD |
|
|
HIGH
POWER OUTPUT 5W |
|
|
Ni-MH
LONG-LIFE BATTERY FNB-83
(7.2 V, 1400 mAh overnight charger
included) |
|
|
PROGRAMMABLE
KEYS FOR USER CONVENIENCE |
|
|
SPLIT
CTCSS/DCS AND DCS ENCODE-ONLY CAPABILITY |
|
144 / 430 MHz
DUAL BAND HANDHELD WITH WIDE BAND RECEPTION
The FT-60E’s
small size allows you to take it anywhere - hiking, skiing, or while
walking around town - and its operating flexibility brings the user
many avenues of operating enjoyment. Its incredibly tiny FNB-83
Rechargeable Nickel-Metal Hydride Battery Pack provides up to 5 Watts
of transmit power on the 144 MHz and 430 MHz Amateur Bands. Besides 144-
and 430-MHz transceive operation, the FT-60E provides
receive coverage of the VHF and
UHF TV bands, the VHF AM aircraft band, and a wide range of commercial
and public safety frequencies!
NEW
FEATURES ON THE FT-60R (FT60E)
New and exciting features of the FT-60R are the
Emergency Automatic ID (EAI) function, that will automatically cause
your FT-60E to transmit your callsign and engage your rig_s
microphone, even if you are disabled and unable to press the PTT
switch; Enhanced Paging and Code Squelch (EPCS), that allows you to
page a particular station and only receive calls from that station, if
desired; and a security Password feature, to prevent
unauthorized
use of your transceiver.
FEATURE
HIGHLIGHTS Specifications
• Over 1000 Memory Channels w/Alpha-numeric Labels
• Ten Memory Banks for Channel Allocation
• High Power Output: 5 Watts
• Long-life FNB-83 (7.2 V/1400 mAh) and Overnight Charger
included
• CTCSS and DCS Encode/Decode, with Split Tone and DCS
Encode-only Capability
• Nine DTMF
Auto-Dialer Memories
• Two Front Panel Programmable Keys
• Convenient Access Key for Vertex Standard’s WIRES™ (Wide-coverage
Internet Repeater Enhancement System)
• RF Squelch (only passes signals exceeding programmed level)
• Mono-band and Memory-only Operating Modes
• Rugged Die-cast, Water-resistant Case Construction
• Huge LCD Display
• Transmit Time-Out Timer (TOT) and Automatic Power-Off (APO)
• Automatic Repeater Shift (ARS)
• YAESU’s exclusive ARTS™ (Auto-Range Transponder System)
which "beeps" the user when you move out of communications
range
| FT-60R
NEW GENERATION HANDHELD |
| General |
| Frequency
Ranges: * |
RX
108-137 MHz (Air Band)
137-520 MHz (AM / FM)
(Cellular phone Blocked)
700-999 MHz (FM)
(Cellular phone Blocked)
TX 144-148 MHz
430-450 MHz |
| Channel
Steps: |
5,
10, 12.5, 15, 20, 25, 50, 100 kHz |
| Frequency
Stability: |
±5
ppm(–10° C to +60° C, +14° F to +140° F) |
| Repeater
Shift: |
±600
kHz (144 MHz) ± 1.6 / 5.0 / 7.6 MHz (430 MHz) |
| Emission
Type: |
F2
, F3 |
| Antenna
Impedance: |
50
ohms |
| Supply
Voltage: Nominal: |
7.2
V DC, Negative Ground |
| Operating: |
6.0~16
V, Negative Ground(EXT DC JACK)
11~16 V, Negative Ground(EXT DC JACK with Charging) |
| Current
Consumption: |
125
mA (Receive)
45 mA (Standby, Saver Off) VHF
47 mA (Standby, Saver Off) UHF
19 mA (Standby, Saver On)
0.8 mA(Auto Power Off)
1.3 A (5 W Tx , 144 MHz) 7.2 V DC
1.5 A (5 W Tx , 430 MHz) 7.2 V DC |
| Operating
Temperature: |
–20°
C to +60° C (–4° F to +14° F) |
| Case
Size: |
2.3"
(W) x 4.3" (H) x 1.2" (D)(58 x 109 x 30 mm )
(W/O knob & antenna) |
| Weight: |
13.05
oz (370 g) with FNB-83 & antenna |
| *
= TX expand to ca. 137-174 MHz for Export possible
Transmitter
|
| RF
Power Output: |
High
5 W (@ 7.2 V FNB-83)
Mid 2 W (@ 7.2 V FNB-83)
Low 0.5 W (@ 7.2 V FNB-83) |
| Modulation
Type: |
Variable
Reactance F2 , F3 |
| Maximum
Deviation: |
±5
kHz F2 , F3 |
| Spurious
Emission: |
At
least 60 dB below (High & Mid)At least 40 dB below (Low) |
| Microphone
Impedance: |
2
k. |
|
Receiver
|
| Circuit
Type: |
Double-Conversion
Super heterodyne |
| Intermediate
Frequencies: |
1st:
47.25 MHz
2nd: 450 KHz |
| Sensitivity: |
0.8
µV TYP for 10 dB SN (108-137 MHz, AM)
0.2 µV for 12 dB SINAD (137-140 MHz, NFM)
0.16 µV for 12 dB SINAD (140-150 MHz, NFM)
0.2 µV TYP for 12 dB SINAD (150-174 MHz, NFM)
0.3 µV TYP for 12 dB SINAD (174-300 MHz, NFM)
0.8 µV TYP for 12 dB SINAD (300-336 MHz, NFM)
0.25 µV TYP for 12 dB SINAD (336-420 MHz, NFM)
0.2 µV for 12 dB SINAD (420-470 MHz, NFM)
0.25 µV TYP for 12 dB SINAD (470-520 MHz, NFM)
0.5 µV TYP for 12 dB SINAD (800-900 MHz, NFM)
0.8 µV TYP for 12 dB SINAD (900-999.99 MHz, NFM)
Cellular Blocked |
| Selectivity: |
NFM,
AM 12 KHz / 35 KHz(–6 dB / –60 dB) |
| AF
Output: |
400
mW @ 8 . for 10 % THD (@ 7.5 V) |
|
